LOS CÓDIGOS DE COPIADORAS KONICA SON ELEMENTALES PARA SABER EN DONDE SE ENCUENTRA ALGÚN PROBLEMA TÉCNICO
 |
| códigos de error copiadora konica minolta solución de problemas |
Malfunction Code
|
Malfunction Name
|
Description
|
Rank
| |
C0001
|
LCT Communication Failure
|
B
| ||
C0202
|
Tray 1 Elevator Failure
|
The Lift-Up Sensor is not unblocked even after the set period of time has elapsed after the paper lift up operation for the drawer has begun.
|
B
| |
B
| ||||
C0204
|
Tray 2 Elevator Failure
|
B
| ||
C0206
|
Tray 3 Elevator Failure
|
B
| ||
C0208
|
Tray 4 Elevator Failure
|
B
| ||
C0209
|
LCT Elevator Motor Failure
|
B
| ||
C0210
|
LCT Lift Failure
|
B
| ||
C0211
|
Bypass Lifting Motion Failure
|
The Bypass Lift Sensor (PC29) is not blocked or unblocked even after the set period of time has elapsed after the Bypass Pick
|
B
| |
C0212
|
LCT Ejection Failure
|
B
| ||
C0213
|
LCT Shift Gate Malfunction
|
B
| ||
C0214
|
LCT Shifting Failure
|
B
| ||
C0215
|
LCT Shift Motor Malfunction
|
B
| ||
C0701
|
Manual Paper Size Detection Adjustment Failure
|
The control value of the Manual Paper Size
|
B
| |
Detection Unit does not fall within the specified range when an adjustment is made of manual B
|
B
| |||
paper size detection.
|
B
| |||
C1080
|
Exit Option Communication Failure
|
The connection status of a finishing option is changed after the copier has been turned on. B
|
B
| |
C1183
|
Elevator Motor Ascent/Descent Drive Failure
|
B
| ||
C1190
|
Aligning Plate 1 Drive Failure
|
B
| ||
C1191
|
Aligning Plate 2 Drive Failure
|
B
| ||
C11A0
|
Paper-Lifter Drive Failure
|
B
| ||
C11A1
|
Exit Roller Pressure/Retraction Failure
|
B
| ||
C11A2
|
Saddle Exit Roller Pressure/ Retraction Failure
|
B
| ||
C11A3
|
Shutter Drive Failure
|
B
| ||
C11A4
|
Saddle Exit Motor Failure
|
B
| ||
C11A5
|
Saddle In & Out Guide Motor Failure
|
B
| ||
C11A6
|
Saddle Layable Guide Motor Drive Failure
|
B
| ||
C11B0
|
Staple Unit CD Drive Failure
|
B
| ||
C11B2
|
Staple Drive Failure
|
B
| ||
C11B5
|
Saddle Staple 1 Drive Failure
|
B
| ||
C11B6
|
Saddle Staple 2 Drive Failure
|
B
| ||
C11C0
|
Punch Cam Motor Unit Failure
|
B
| ||
C11D0
|
Crease Motor Drive Failure
|
B
| ||
C2211
|
IU Motor Failure
|
The IU Motor Lock signal remains set to H for a set period of time while the IU Motor is turning. The IU Motor Lock signal remains set to L for aset period of time while the IU Motor remains stopped.
|
B
| |
C2351
|
Toner Suction Fan Motor Failure
|
The Toner Suction Fan Motor Lock signal remains set to H for a set period of time while the Toner Suction Fan Motor is turning.
|
C
| |
The Toner Suction Fan Motor Lock signal C remains set to L for a set period of time while the Toner Suction Fan Motor remains stopped.
| ||||
C2431
|
IU Fuse Blowing Failure (*1)
|
The fuse is not blown even after the lapse of a predetermined period of time.
|
B
| |
C2557
|
ATDC Sensor Failure
|
The scanning value of the ATDC Sensor is less than 7 % while the IU Motor is turning. The scanning value of the ATDC Sensor is more than 19 % while the IU Motor is turning.
|
B
| |
C255C
|
ATDC Adjustment Failure
|
The adjustment of the ATDC control voltage could not be completed in the set period of time when function F8 is run.
|
B
| |
The ATDC control voltage was not within the range of 5.39 V to 8.15 V when function F8 is run.
| ||||
C2654
|
EEPROM Failure
|
An EEPROM where no initial data is written is detected.
|
B
| |
C2702
|
Abnormal Image Transfer Voltage
|
The image transfer voltage exceeds 100 V for the set period of time while the IU Motor remains stopped.
|
B
| |
C3451
|
Fusing Warm-Up Failure (Main)
|
The Fusing Roller Thermistor does not detect the required temperature within 30 sec. after a warmup cycle has begun; therefore, the copier does not complete the warm-up cycle.
|
A
| |
C3452
|
Fusing Warm-Up Failure (Sub)
|
The temperature of the Fusing Rollers does not reach the required level even after the set period of time has elapsed during a warm-up cycle.
|
A
| |
The Fusing Roller Sub Thermistor does not detect the required temperature within 30 sec. after a warm-up cycle has begun; therefore, the copier does not complete the warm-up cycle.
| ||||
The temperature of the Fusing Rollers does not reach the required level even after the set period of time has elapsed during a warm-up cycle.
| ||||
C3751
|
High Fuser Temperature Failure (Main)
|
The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature above 240 °C when the Main Power Switch is set to ON.
|
A
| |
C3752
|
High Fuser Temperature Failure (Sub)
|
A
| ||
C3851
|
Low Fuser Temperature Failure (Main)
|
The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below 105 °C during standby.
|
A
| |
The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below 105 °C during printing.
| ||||
C3852
|
Low Fuser Temperature Failure (Sub)
|
A
| ||
C4001
|
Main Unit Communication Failure
|
Communications with the Mechanical Control Board and the MFBS Board fail.
|
B
| |
C4002
|
HSYNC Detection Failure
|
No SOS falling edges are detected within the set
|
B
| |
period of time after laser emission began while
| ||||
the Polygon Motor is turning.
| ||||
No SOS falling edges are detected while VIA remains ON.
| ||||
C4101
|
Polygon Motor Failure
|
The Polygon Motor Lock signal could not be detected within the set period of time after the Polygon Motor is energized. (Faulty start detection)
|
B
| |
No First Lock signals are detected during the 1-second period that starts 1 second after a First Lock signal. (Faulty lock signal detection)
| ||||
The Polygon Motor Lock signal could not be detected after the set period of time has elapsed while the Polygon Motor is turning. (Out-of-timing lock detection)
| ||||
The Polygon Motor Lock signal is set to ON for longer than the set period of time while the Polygon Motor remains stopped. (Abnormal lock detection)
| ||||
C4721
|
Main Unit G/A Communication Failure
|
Communications with the gate array for expansion I/O (the IC mounted on the Mechanical Con-trol Board) fail.
|
B
| |
C5102
|
Main Motor Failure
|
The Transport Motor Lock signal remains set to H for a set period of time while the Transport Motor is turning.
|
B
| |
C5351
|
Power Supply Cooling Fan Motor Failure
|
The Power Supply Cooling Fan Motor Lock signal remains set to H for a set period of time while the Power Supply Cooling Fan Motor is turning. The Power Supply Cooling Fan Motor Lock signal remains set to L for a set period of time while the Power Supply Cooling Fan Motor remains stopped.
|
B
| |
C5352
|
Cooling Fan Motor Failure
|
The Cooling Fan Motor Lock signal remains set to H for a set period of time while the Cooling Fan Motor is turning. The Cooling Fan Motor Lock signal remains set to L for a set period of time while the Cooling Fan Motor remains stopped.
|
B
| |
C5353
|
IU Cooling Fan Motor Failure
|
The IU Cooling Fan Motor Lock signal remains set to H for a set period of time while the IU Cooling Fan Motor is turning. The IU Cooling Fan Motor Lock signal remains set to L for a set period of time while the IU Cooling Fan Motor remains stopped.
|
B
| |
C8301
|
EDH Fan Motor Failure
|
C
| ||
CA052
|
MIO Device Failure
|
The MIO device does not operate properly.
|
C
| |
CC153
|
Flash ROM Failure
|
The Flash ROM data was determined to be faulty when the unit was turned on.
|
B
| |
CC155
|
Exit Option Flash ROM Failure
|
